HOME  |   ABOUT US  |   VACANCIES  |   CONTACT US  
AMS No-Dig Directional Drilling and Auger Boring Specialists
  HOME | DIRECTIONAL DRILLING | GUIDED AUGER BORING | ACCREDITATIONS |  FLEET |  EQUIPMENT SALES |  CASE STUDIES  
  DIRECTIONAL DRILLING |  DIRECTIONAL DRILLING PROCESS |  MAXI DRILLING |  PIT LAUNCH |  MUD RECYCLING  
 
 
 

Directional Drilling

Directional Drilling, or Horizontal Directional Drilling (HDD) is a technique by which pipe, duct or cable can be installed underground without disturbing surface structures and thereby avoiding the disruption caused by traditional open trenching methods.

Installations under motorways, waterways, railways, airport runways and SSSI sites are routine.

The cost savings resulting from the application of this technology, in both direct and consequential terms, can be very significant. Directional Drilling (HDD) is fast, efficient and environmentally friendly.

Using the latest in tooling and mud technology, successful installations can be achieved in most ground formations.

The AMS No-Dig fleet has the capacity to install product up to 1400mm in diameter and up to 2000m in length, subject to ground conditions.

See details of our latest new directional drilling rig - the Prime Drilling PD60/33

Prime Drilling 250 ton drill rig
AMS No-Dig's Prime Drilling 250 ton drill rig


Our new PD60 drill rig carrying out a 225m drill with 2 x 600mm bores under a live rail line

Directional Drilling Method:
Click to view larger video



PowerBore 70 ton drilling Rig
AMS No-Dig's Power Bore 70 ton drill rig

Prime Drilling PD60/33
AMS No-Dig's Prime Drilling PD60/33 60 ton directional drilling rig



Vermeer rig in shaft
One of AMS No-Dig's Vermeer drilling rig being lowered into a shaft

 


 
  AMS No-Dig Ltd, Brigg Road, Scunthorpe, DN16 1AP
AMS No-Dig Ltd is Registered in England No. 02703484 : VAT Registration No.: GB 651 531 457
© 2017 AMS No-Dig Ltd